Hydraulic Seal Saver Protective Boot

Heat & Chemical Tolerant Material Specifications

Ballistic Nylon

Ballistic nylon is a synthetic nylon fabric used to manufacture a variety of items, including tool belts, jackets, protective curtains, and other items for use in industrial applications. It can also be used in conjunction with Kevlar to manufacture bullet proof vests. The material is woven from nylon yarns of various denier (weight), with the double weave 1050 denier fabric being most durable for its weight level. It is resistant to abrasion and tearing, and is backed with polyurethane (which aids in waterproofing), making it the perfect fabric for protective applications.

Base Fabric Nylon
Color / Apperance (Outside) Black
Color / Apperance (Inside) Black
Roll Length 50 yards (45.7 m)
Fabric Weight 12.38 oz / square yard - coated
Fabric Thickness .018 inches
Strip Tensile (Warp) 711
Strip Tensile (Fill) 690
Grab Tensile (Warp) 1126
Grab Tensile (Fill) 1050
% Elongation at Break (Warp) 51.0
% Elongation at Break (Fill) 41.5
% Crimp (Warp) 6.5
% Crimp (Fill) 3.5
% Shrinkage - 3 Minutes @ 350° (Warp) 7.0
% Shrinkage - 3 Minutes @ 350° (Fill) 5.0
Resistance Water, Oil, Abrasion
Sunlight & Age Resistance N/A
Electrical Properties N/A
Temperature Recommendations Max 250° Constant

Kevlar

100% Kevlar fiber light weight fabric woven in a 3/1 left hand twill pattern, woven face down. Fabric is coated on both sides with medium gray silicone rubber. Resistant to some chemicals and solvents.

NOTE: This fabric has passed FAA's one hour "Igloo Fire Test", which may allow certain narrow body combi airplane operators to comply with the FAA's new air worthiness directive #AD-93-07-15.

Base Fabric 100% Kevlar
Color / Apperance Medium Gray Silicone Rubber
Available Widths (Standard) 60" (1.5m)
Roll Lengths (Yards) 50" (45.7m)
Weave Style 3/1 Left Hand Twill, Woven Face Down
Construction (Ends X Picks/sq.inch) 53 x 43 (20.8 cm x 16.9 cm)
Fabric Weight (oz./sq. yard - Coated) 19.5" (655 gm/sq. m)
Fabric Thickness (Inches) 0.03 (0.76 mm)
Warp Strength (lbs/inch) 400 (191 Kg/2.54 cm)
Fill Strength (lbs/inch) 360 (162 Kg/2.54 cm)
Abrasion Resistance N/A
Coated Fabric Flame Resistance (FAR 25.853(a)) After Flame, seconds 2.0
Coated Fabric Flame Resistance (FAR 25.853(a)) After Glow, seconds 2.0
Coated Fabric Flame Resistance (FAR 25.853(a)) Chare Length, inches 0.3 (0.76 cm)
Chemical Resistance N/A
Sunlight & Age Resistance N/A
Electrical Properties N/A
Available Finishes (Finish #) 36, Medium gray silicone rubber, both sides

Medium Weight Silica

A woven continuous filament amorphous silica fabric featuring Mylar aluminizing one side. Applications include molten metal splash, valve covers, curtain material, damage control cloth, and others. Resistant to most chemicals, good thermal protection to temperatures of 1800º F (base cloth only).

Base Fabric Silica
Color / Apperance (Outside) Mylar aluminized
Color / Apperance (Inside) Tan
Available Widths (Standard) 34.4" (0.87 m)
Roll Lengths (Yards) 55" (50.3 m)
Weave Style Satin, 8 harness
Construction (ends x picks/sq. inch) 47 x 33 (18.5 cm x 13 cm)
Fabric Weight (oz./sq. yard - coated) 20" (679 gm/sq. m)
Fabric Thickness (Inches) 0.024 (0.61 mm)
Warp Strength (lbs/inch) 300 (136 Kg/2.54 cm)
Fill Strength (lbs/inch) 230 (105 Kg/2.54 cm)
Abrasion Resistance Very Good
Temperature Tolerance (Base Fabric Only) 1800º F continuous (990º C)
Temperature Tolerance (Base Fabric Only) 3000º F melt temp. (1649º C)
Base Fabric Certification 94% Silica Content
Coating Certification Mylar Film
Chemical Resistance Excellent
Solvent Resistance Excellent
Sunlight & Age Resistance Base fabric is partially UV sensitive
Electrical Properties High dielectric strength, low constants

Medium Weight Silica w/Single-Sided Red Silicone Rubber Coating

A woven continuous filament amorphous silica fabric featuring red silicone rubber coating one side. Applications include pad fabrics, valve covers, curtain materials and damage control cloth. Resistant to most chemicals. Good thermal protection to temperatures of 1800°F, base cloth only.

Base Fabric Silica
Color / Apperance (Outside) Red Silicone Rubber
Color / Apperance (Inside) Loom Stage
Available Widths (Standard) 35" (0.89m)
Roll Lengths (Yards) 50" (45.7m)
Weave Style Satin, 8 harness
Construction (ends x picks/sq. inch) 47 x 33 (18.5 cm x 13 cm)
Fabric Weight (oz./sq. yard - coated) 27.3" (927 gm/sq. m)
Fabric Thickness (Inches) 0.030 (0.76 mm)
Warp Strength (lbs/inch) 300.0 (136Kg/2.54cm)
Fill Strength (lbs/inch) 230.0 (105 Kg/2.54 cm)
Abrasion Resistance Very good on silicone side
Temperature Tolerance (Base Fabric Only) 1800º F continuous (990º C)
Temperature Tolerance (Base Fabric Only) 3000º F melt temp. (1649º C)
Base Fabric Certification 94% Silica Content
Coating Certification N/A
Chemical Resistance Excellent
Solvent Resistance Excellent
Sunlight & Age Resistance Excellent
Electrical Properties High dielectric strength, low constants

Medium Weight Silica w/Double-Sided Red Silicone Rubber Coating

A woven continuous filament amorphous silica fabric featuring red silicone rubber coating two sides. Applications include pad fabrics, expansion joints, valve covers, and special curtain materials. Resistant to most chemicals. Good thermal protection to temperatures of 1800°F, base cloth only.

The product data sheet shows a continuous temperature of 1800°F and the MSDS mentioned decomposition starting at 450°F. This is for the difference between the base cloth 1800°F continuous and the silicone finish 450°F continuous.

Base Fabric Silica
Color / Apperance (Outside) Red Silicone Rubber
Color / Apperance (Inside) Red Silicone Rubber
Available Widths (Standard) 35" (0.89m)
Roll Lengths (Yards) 50" (45.7m)
Weave Style Satin, 8 harness
Construction (ends x picks/sq. inch) 47 x 33 (18.5 cm x 13 cm)
Fabric Weight (oz./sq. yard - coated) 31.9" (1084 gm/sq. m)
Fabric Thickness (Inches) 0.034 (0.86 mm)
Warp Strength (lbs/inch) 250.0 (114Kg/2.54cm)
Fill Strength (lbs/inch) 150.0 (68 Kg/2.54 cm)
Abrasion Resistance Very good
Temperature Tolerance (Base Fabric Only) 1800º F continuous (990º C)
Temperature Tolerance (Base Fabric Only) 3000º F melt temp. (1649º C)
Base Fabric Certification 94% Silica Content
Coating Certification N/A
Chemical Resistance Excellent
Solvent Resistance Excellent
Sunlight & Age Resistance Excellent
Electrical Properties High dielectric strength, low constants

Premium Weight Silica

A woven continuous filament amorphous silica fabric featuring a proprietary tan coating & aluminized on one side. Applications include pad fabrics, valve and generator covers, curtain materials, and damage control cloth. Resistant to most chemicals, offers good thermal protection to temperatures over 2000º F.

Base Fabric Silica
Color / Apperance (Outside) Mylar aluminized
Color / Apperance (Inside) Tan
Available Widths (Standard) 35" (0.89 m)
Roll Lengths (Yards) 55" (50.3 m)
Weave Style Satin, 12 harness
Construction (ends x picks/sq. inch) 48 x 27 (18.9 cm x 10.6 cm)
Fabric Weight (oz./sq. yard - coated) 36.5" (1240 gm/sq. m)
Fabric Thickness (Inches) 0.043 (1.09 mm)
Warp Strength (lbs/inch) 500 (227 Kg/2.54 cm)
Fill Strength (lbs/inch) 250 (114 Kg/2.54 cm)
Abrasion Resistance N/A
Temperature Tolerance (Base Fabric Only) 1800º F continuous (990º C)
Temperature Tolerance (Base Fabric Only) 3000º F melt temp. (1649º C)
Base Fabric Certification 94% Silica Content
Coating Certification 1 mil Mylar Aluminum Laminate
Chemical Resistance Excellent
Solvent Resistance Excellent
Sunlight & Age Resistance Excellent
Electrical Properties High dielectric strength, low constants

11 oz. Aluminized Cloth

A woven fabric of an Aramid fiber blend over a carbon core yarn, aluminized on one side. Applications include safety clothing, gloves, mitts, jackets, curtains, and other industrial applications. Resistant to reflected heat sources, offers excellent thermal protection for safety garments.

Base FabricAramid cover with "PAN" insert
Color / Apperance (Outside) Aluminized
Color / Apperance (Inside) Light Green
Available Widths (Standard) 40" (1.0m)
Roll Lengths (Yards) 50" (45.7m)
Weave Style 2/2 Herringbone Twill
Construction (ends x picks/sq. inch) 35 x 25 (13.8 cm x 9.8 cm)
Fabric Weight (oz./sq. yard - coated) 14.4" (489 gm/sq. m)
Fabric Thickness (Inches) 0.034 (0.86 mm)
Warp Strength (lbs/inch) 185 (84 Kg/2.54 cm)
Fill Strength (lbs/inch) 120 (55 Kg/2.54 cm)
Abrasion Resistance Excellent
Temperature Tolerance 50º - 500º F constant
Thermal Conductivity - "K" factor (Btu x in/hr x sq. ft. x º F) 0.610 (ASTM C-177)
Total Conductance - "C" factor (Btu/hr X sq. ft. x º F) 20.00 (ASTM G-177)
Total Resistance - "R" factor (Hr x sq. ft. x º F/Btu) 0.050 (ASTM C-177)
Coating Certification Mylar Film Aluminum Laminate
Solvent ResistanceN/A
Sunlight & Age Resistance Base fabric is partially UV sensitive