Hose Saver
Protection Sleeves

Protect Your Hoses from Contamination
and Costly Downtime.

Hose Saver protection sleeves extend the life of hydraulic and pneumatic hoses by eliminating unnecessary expenses from downtime, oil loss, contamination and replacement hoses. Made from the same heat and chemical resistant materials as the Seal Saver protective boots, our hose protectors are adjustable to fit various hose sizes.

Each sleeve wraps around a single hose or bundle, to keep contaminants out and protect them in the toughest working environments. Our easy-to-install protection sleeves use a unique VELCRO® closure for a quick and simple installation with no disconnection of the hose required.

Hose Saver sleeves are ideal for any environment on virtually any machine including industrial machinery, ocean vessels and heavy equipment. Stop replacing your hoses and start protecting them from abrasions, ultraviolet rays, wind, rain, snow and dry rot. If you have a hose, Hose Saver can cover it.

Request a Quote

Close up of Hose Saver protection sleeves

Materials & Sizes

Find the Right Material for Your Equipment

Available in three heat and chemical resistant material options, each Hose Saver is custom built for hoses up to 13” in diameter. Hose Saver is sold by the foot or in 50’ or 100’ rolls.

Nylon Ballistic

Product Description

Ballistic Nylon is woven from nylon yarns of various denier (weight), with the double weave 1050 denier fabric being most durable for its weight level. It's sturdy, yet flexible nylon is resistant to abrasions, water, oil, sunlight and tearing and is backed with polyurethane (which aids in waterproofing). The material will not break down with age and can be used in temperatures continuously up to 250 °F, making it ideal for protecting hydraulic and pneumatic hoses in most working environments.

Available Sizes
HS-012 (3/8") Details
Hose Saver
Nylon Ballistic
Details:
HS-012 (3/8")
Sold By The Foot or 50' & 100' Rolls

Please Call Or Click Below For Pricing

HS-028 (1") Details
Hose Saver
Nylon Ballistic
Details:
HS-028 (1")
Sold By The Foot or 50' & 100' Rolls

Please Call Or Click Below For Pricing

HS-064 (2 1/4") Details
Hose Saver
Nylon Ballistic
Details:
HS-064 (2 1/4")
Sold By The Foot or 50' & 100' Rolls

Please Call Or Click Below For Pricing

Material Specifications
Base Fabric Nylon
Color / Apperance (Outside) Black
Color / Apperance (Inside) Black
Roll Length 50 yards (45.7 m)
Fabric Weight 12.38 oz / square yard - coated
Fabric Thickness .018 inches
Strip Tensile (Warp) 711
Strip Tensile (Fill) 690
Grab Tensile (Warp) 1126
Grab Tensile (Fill) 1050
% Elongation at Break (Warp) 51.0
% Elongation at Break (Fill) 41.5
% Crimp (Warp) 6.5
% Crimp (Fill) 3.5
% Shrinkage - 3 Minutes @ 350° (Warp) 7.0
% Shrinkage - 3 Minutes @ 350° (Fill) 5.0
Resistance Water, Oil, Abrasion
Sunlight & Age Resistance N/A
Electrical Properties N/A
Temperature Recommendations Max 250° Constant

Silicon Coated Kevlar

Product Description

Custom built for hoses up to 10" in diameter, our Kevlar fiber is a lightweight fabric woven—face down—in a 3/1 left hand twill pattern. The fabric is coated on both sides with medium gray silicone rubber. It's resistant to some chemicals and acids and protects hydraulic and pneumatic hoses that may be exposed to rocks, sharp objects or edges, caustic or acidic substances or heat up to 700°F, making it a good application where a stronger, denser fabric is needed.

NOTE: Our Kevlar fabric has passed FAA's one hour "Igloo Fire Test", which may allow certain narrow body combi airplane operators to comply with the FAA's new air worthiness directive #AD-93-07-15.

Material Specifications
Base Fabric 100% Kevlar
Color / Apperance Medium Gray Silicone Rubber
Available Widths (Standard) 60" (1.5m)
Roll Lengths (Yards) 50" (45.7m)
Weave Style 3/1 Left Hand Twill, Woven Face Down
Construction (Ends X Picks/sq.inch) 53 x 43 (20.8 cm x 16.9 cm)
Fabric Weight (oz./sq. yard - Coated) 19.5" (655 gm/sq. m)
Fabric Thickness (Inches) 0.03 (0.76 mm)
Warp Strength (lbs/inch) 400 (191 Kg/2.54 cm)
Fill Strength (lbs/inch) 360 (162 Kg/2.54 cm)
Abrasion Resistance N/A
Coated Fabric Flame Resistance (FAR 25.853(a)) After Flame, seconds 2.0
Coated Fabric Flame Resistance (FAR 25.853(a)) After Glow, seconds 2.0
Coated Fabric Flame Resistance (FAR 25.853(a)) Chare Length, inches 0.3 (0.76 cm)
Chemical Resistance N/A
Sunlight & Age Resistance N/A
Electrical Properties N/A
Available Finishes (Finish #) 36, Medium gray silicone rubber, both sides

Coated Silica Cloth

Product Description

Custom built for hoses that are minimum 10" in diameter, our Coated Silica Cloth is a woven, continuous filament amorphous silica fabric featuring a red silicone rubber coating. It's resistant to most chemicals and provides thermal protection. It's ideal for hoses in environments that are exposed to direct heat and temperatures up to 1,800 °F.

Available Sizes
HS-012BGK (3/8 - 1") - Grey Kevlar w/Ballistic Back Details
Hose Saver
Coated Silica Cloth
Details:
HS-012BGK (3/8 - 1") - Grey Kevlar w/Ballistic Back
Sold By The Foot

Please Call Or Click Below For Pricing

HS-012GK (3/8 - 1") - Grey Kevlar Details
Hose Saver
Coated Silica Cloth
Details:
HS-012GK (3/8 - 1") - Grey Kevlar
Sold By The Foot

Please Call Or Click Below For Pricing

HS-028BGK (1 - 2 1/4") - Grey Kevlar w/Ballistic Back Details
Hose Saver
Coated Silica Cloth
Details:
HS-028BGK (1 - 2 1/4") - Grey Kevlar w/Ballistic Back
Sold By The Foot

Please Call Or Click Below For Pricing

HS-028GK (1 - 2 1/4") - Grey Kevlar Details
Hose Saver
Coated Silica Cloth
Details:
HS-028GK (1 - 2 1/4") - Grey Kevlar
Sold By The Foot

Please Call Or Click Below For Pricing

HS-064BGK (2 1/4 - 3 1/2") - Grey Kevlar w/Ballistic Back Details
Hose Saver
Coated Silica Cloth
Details:
HS-064BGK (2 1/4 - 3 1/2") - Grey Kevlar w/Ballistic Back
Sold By The Foot

Please Call Or Click Below For Pricing

HS-064GK (2 1/4 - 3 1/2") - Grey Kevlar Details
Hose Saver
Coated Silica Cloth
Details:
HS-064GK (2 1/4 - 3 1/2") - Grey Kevlar
Sold By The Foot

Please Call Or Click Below For Pricing

Material Specifications
Base FabricSilica
Color / Apperance (Outside)Red Silicone Rubber
Color / Apperance (Inside)Loom Stage
Available Widths (Standard)35" (0.89m)
Roll Lengths (Yards)50" (45.7m)
Weave StyleSatin, 8 harness
Construction (ends x picks/sq. inch)47 x 33 (18.5 cm x 13 cm)
Fabric Weigth (oz./sq. yard - coated)27.3" (927 gm/sq. m)
Fabric Thickness (inches)0.030 (0.76 mm)
Warp Strength (lbs/inch)300.0 (136Kg/2.54cm)
Full Strength (lbs/inch)230.0 (105 Kg/2.54cm)
Abrasion ResistanceVery good on silicone side
Temperature Tolerance (Base Fabric Only)1800° F continuous (990° C)
Temperature Tolerance (Base Fabric Only)3000° F melt temp (1649° C)
Base Fabric Certification94% Silica Content
Coating CertificationN/A
Chemical ResistanceExcellent
Solvent ResistanceExcellent
Sunlight & Age RestistanceExcellent
Electrical PropertiesHigh dielectric strength, low constants
Line rendering of hydraulic cylinder rod

Order Your Hose Saver

Get started today! Click below to fill out our form to request a quote or call us at 800.683.5189 to provide us your specifications.

Request A Quote

Black Arrow Red Arrow White Arrow Yellow Arrow Phone Black